pg1_pg20.FH10 - page 120

118
Gel Potting Compounds
Raytech Single Part Potting Compounds
Raytech Wonder Gel
& Wonder Gel Invisible
Description:
Eco-friendly Wonder Gel and Wonder Gel Invisible are revolutionary single component
insulating gels in a cartridge dispenser. There is no need to mix anything as the product is
already cross-linked. Use only as much as you need, never hardens even once opened,
re-enterable, re-usable, no shelf life and no waste. Fits any standard cartridge gun.
Approvals:
EN50393: CEI 20-33, fire retardant according to IEC 332-I. CEI 20-33
Technical characteristics:
Non toxic and no shelf life
Re-enterable and re-usable even after long periods of operation
Strong self-levelling and self-amalgamating characteristics
Gives protection greater than IP68 according to IEC 529
Dielectric strength: >23 Kv/mm
Volume resistivity: > 2
15
Ohms/cm
Working temperature: -60°C to +200°C
Overload temperature for short periods: up to +200°C
Fungal and UV stabilised
Description
Green/Blue Cartridge of Gel
Clear Cartridge of Gel
Order Code
WonderGel
WonderGelInvisible
Size
280ml
281ml
Raytech Monogel
Description:
Eco-friendly, general purpose, clear, electrical insulating gel.
Technical characteristics:
Non toxic and no shelf life
Re-enterable and re-usable even after long periods of operation
Strong self-levelling and self-amalgamating characteristics
Gives protection greater than IP68 according to IEC 529
Dielectric strength: >23 Kv/mm
Volume resistivity: > 2
15
Ohms/cm
Working temperature: -60°C to +200°C
Overload temperature for short periods: up to +200°C
Description
Clear Insulating Gel
Order Code
Monogel
Size
280ml
Raytech Wonder Fluid
Description:
The eco-friendly Wonder Fluid is a fluid single-
component electrical insulating gel that is ready to use
in a cartridge dispenser.
Technical characteristics:
Non toxic and no shelf life
Re-enterable and re-usable even after long periods of operation
Strong self-levelling and self-amalgamating characteristics
Gives protection greater than IP68 according to IEC 529
Dielectric strength: >23 Kv/mm
Volume resistivity: > 2
15
Ohms/cm
Working temperature: -60°C to +200°C
Overload temperature for short periods: up to +200°C
Fungal and UV stabilised
Approvals:
UL 94-HB
EN50393: CEI 20-33, fire retardant according to IEC 332-I.
CEI 20-33
Speedy Wire Gel - Pulling Lubricant
Description:
Thanks to it’s consistency it allows for savings up to 3
times the amount used compared to other solutions.
Technical characteristics:
PH: 6-8
Density: ~1
1 litre
Colour: Clear
Speedy Wire Spray - Pulling Lubricant
Description:
Thanks to it’s canister and dispensing nozzle it allows
for accurate guiding of the lubricant, including inside
piping and ducts.
Technical characteristics:
PH: 8.5-9
Density: ~1.4
400ml canister
Colour: White foam
Description
Aerosol Pulling Lubricant
Order Code
SPEEDYWIRESPRAY
Size
400ml
Description
Gel Pulling Lubricant
Order Code
SPEEDYWIREGEL
Size
1 litre
Description
Fluid Insulating Gel
Order Code
WonderFluid
Size
280ml
Pulling Lubricants
Approvals:
UL 94-HB
EN50393: CEI 20-33, fire retardant according to IEC 332-I.
CEI 20-33
1...,110,111,112,113,114,115,116,117,118,119 121,122,123,124,125,126,127,128,129,130,...324
Powered by FlippingBook