pg1_pg20.FH10 - page 212

210
Smoke & Heat Alarms
Slick Smoke & Heat Alarms 230V
Developed specifically for social and private housing, Slick
®
is the only range of fast-fit rechargeable Ionisation and Optical
smoke and Heat alarms guaranteed for 10 years.
All Slick
®
alarms are BSi Kitemarked to reinforce the consistent quality provided by a leading manufacturer.
‘Wireless Capability’ enabling use with Kidde’s new Wireless Alarm Base (Model: RF-SFTP), for wire-free interconnection.
Compatible with Kidde’s new Remote Test & Hush switch (Model: KN-RTH-RF) via the Wireless Alarm Base.
Integral, double-decker screwless terminal block for fast, push-fit connection.
Unique fast-fit system with separate base plate, enabling fitting after construction and removal for maintenance.
Separate Hush & Test buttons for ease of use.
Green & Red LED’s to indicate alarm status.
Interlinkable with Slick
®
or Firex hard-wired smoke & heat alarms.
Can be added to existing Slick
®
or Firex installations.
Interlinkable with Kidde hard-wired CO alarms using ‘Smart Interconnect’ technology.
Up to 6 months continuous operation from back-up cells, in the event of mains failure.
30 days low battery warning indicator.
Features
Order Code
1SFW
1SFWR
2SFW
2SFWR
3SFW
3SFWR
Description
Ionisation Smoke Alarm
Ionisation Smoke Alarm
Optical Smoke Alarm
Optical Smoke Alarm
Heat Alarm
Heat Alarm
Battery
Alkaline
Lithium
Alkaline
Lithium
Alkaline
Lithium
Slick Wireless Alarm Base
The RF-SFTP unit is an accessory which can simply be fitted
in place of the standard base plate on NEW Slick
®
(‘wireless
capability’) alarms. It enables a versatile system of
interconnected alarm units to be set up without the need for
additional interconnection cable. The base has a rechargeable
lithium battery designed to provide up to 3 months supply on
mains failure. Both the base and the battery are guaranteed
for ten years.
The base includes the Slick
®
mounting platform for the alarm
unit and features a screwless terminal block connection system
for the supply cabling. Conductors can be push-fit installed
and also released easily using a screwdriver in the release
slot of the block. Due to the unique identification code for the
units, the system can be installed in properties within close
proximity to other RF and Kidde systems without cross
interference to the operating system. Up to 15 alarm units
can be interconnected, together with one KN-RTH-RF test
and hush switch, in one system.
The RF-SFTP has an amber LED which also warns of the
battery in the wireless alarm base being in a low state by its
rate of flash (one flash every ten seconds). The RF-SFTP
allows a system to be set up involving the selection of one
base as a MASTER and the others to operate as REMOTES.
The system operates as a monitored RF system, signalling
to and from the MASTER unit which broadcasts every ten
seconds, monitoring the responses from the REMOTES. On
battery back-up, the units are not supervised but do ‘listen’
for signal messages. On mains power being restored the
system re-establishes itself.
An RF-STFP base can be hard wired into existing Kidde Slick
®
and Firex smoke and heat alarms to provide wireless solution
with further accessories.
Order Code
RF-SFTP
Description
Wireless Alarm Base
Battery
Lithium
1SFW/1SFWR
2SFW/2SFWR
3SFW/3SFWR
230V Carbon Monoxide Alarms
Developed for professional, hardwired installation this range is mains powered, with
integral rechargeable lithium battery backup, and fully guaranteed for 6 years.
All Kidde CO alarms are BSi Kitemarked to reinforce the consistent quality provided
by the world’s largest manufacturer.
Mains powered with sealed-in, rechargeable lithium cells for back-up preventing tenant access
Product life of 7 years from initial power-up and full guarantee for 6 years
Kidde’s own CO sensors have unrivalled long-term testing regime demonstrating excellent stability
over time - with third party validation
CO cells use safer and environmentally friendly de-ionised water electrolyte
Checks the environment for CO once every 15 seconds
Neat circular design for ceiling or wall mounting, quickly connected with snap-on harness and locking into place
by default for tamper-resistance
Separate easy to follow user and installer manuals included and also available on Kidde website
Unique Smart Interconnect allowing alarms to interlink with Kidde Slick
®
hard wired smoke and heat alarms,
on one wiring network
Digital display model indicates “Fire” if triggered by interconnected smoke/heat alarm, or “CO” if triggered by
interconnected CO alarm
Digital display model provides early warning of intermittent and low levels of carbon monoxide with Peak Level button to
help identify CO problems when the property is unoccupied.
Features
Carbon Monoxide Alarms
4MCO
4MDCO
Order Code
4MCO
4MDCO
Description
Carbon Monoxide Alarm
Carbon Monoxide Alarm
+ Digital Display
Battery
Lithium
Lithium
1...,202,203,204,205,206,207,208,209,210,211 213,214,215,216,217,218,219,220,221,222,...324
Powered by FlippingBook