pg1_pg20.FH10 - page 213

211
Smoke & Heat Alarms
Single ‘Hush’ and ‘Test’ button
Choice of sealed-in rechargeable (three Panasonic lithium cells) or loose battery back-up ranges
Cable harness type connection and interconnectable up to 24 units
Supplied with base-plate
Features
Order Code
KF1
KF1R
KF2
KF2R
KF3
KF3R
Description
Ionisation with Hush + Mounting Plate
Ionisation with Hush + Mounting Plate
Optical with Hush + Mounting Plate
Optical with Hush + Mounting Plate
Heat with Hush + Mounting Plate
Heat with Hush + Mounting Plate
Battery
Alkaline
Lithium
Alkaline
Lithium
Alkaline
Lithium
Firex Smoke & Heat Alarms 230V
Firex hard-wired smoke and heat alarms all have a full 6-year
guarantee and are BSi Kitemarked to reinforce the consistent
quality provided by the world’s largest manufacturer.
Ionisation and Optical models are complemented by Heat
alarms for situations unsuitable for smoke alarms, such as
kitchens and garages.
All models are mains powered (for professional installation)
with back-up power, complying with current minimum
requirements of the relevant Building Regulations for new
housing, i.e. Grade D (BS5839, Part 6).
Ionisation Smoke Alarms
are for use where a fast flaming
fire (for example, electrical equipment igniting) is more likely
to be a hazard than a slow, smouldering one, such as from
furniture and bedding.
They are more prone to nuisance alarms from cooking particles
and steam near kitchens.
Optical Smoke Alarms
are for use in escape and circulation
routes and in areas where there is danger of ignition of furniture
and surroundings by cigarettes.
They are best suited to slow, smouldering fires such as PVC
cabling, foam filled furniture or bedding material. They are
less prone to nuisance alarms than Ionisation alarms from
cooking particles and steam near kitchens.
Heat Alarms
are for use in humid or dusty environments
where smoke alarms will not operate satisfactorily, such as
kitchens, boiler rooms, unconverted attics and garages.
They are triggered when the ambient temperature reaches
57°C and must always be interconnected with smoke alarms
from the same product range.
KF1/KF1R
KF2/KF2R
KF3/KF3R
Carbon Monoxide Alarms
Lithium Battery Powered Carbon
Monoxide Alarms
The first battery CO alarm guaranteed for 10 years.
Small size & slim profile
Free-standing or wall mounted
Simply activated by slide-on back plate
‘Best Value’ over 10-year life
End-of-Life/Fault LED & “ramp up” horn
“Quick Test” functionality
Event activity data log available on request via Kidde
Features
Alkaline Battery Powered
Carbon Monoxide Alarms
These carbon monoxide alarms provides protection against
the dangers of deadly carbon monoxide levels in the home
and provide continuous monitoring of CO levels.
These alarms can be installed on a wall or as a tabletop unit
for added convenience. The Kidde Alkaline battery operated
carbon monoxide alarms are easy to install units that provide
reliable protection against the dangers of carbon monoxide.
These alarms benefit from a small, sleek design that is suitable
for all living areas. They have a 10-year sensor life, providing
almost twice the length of protection than many other CO alarms.
Order Code
10LLCO
10LLDCO
Description
Carbon Monoxide Alarm
Carbon Monoxide Alarm
+ Digital Display
Battery
Lithium
Lithium
Order Code
7CO
7DCO
Description
Carbon Monoxide Alarm
Carbon Monoxide Alarm
+ Digital Display
Battery
Alkaline
Alkaline
1...,203,204,205,206,207,208,209,210,211,212 214,215,216,217,218,219,220,221,222,223,...324
Powered by FlippingBook